Shaft-cover lifting hooks
800 mm in length, with a ring grip on one side and on the other side with:
- U-shaped hook
- T-shaped right-angled hook
- L-shaped hook
- Total length: 80 cm
- Weight: approx. 1 kg
This is to secure shaft openings and road drains during airing, cleaning and jetting operations. The shaft grating is fitted with two retractable flags. It is available as a closed version or with an approx. 120 mm opening to allow the insertion of jetting hoses or TV cable, for example.
- Diameter: 655 mm
- Weight: approx. 6 kg
- Load capacity: up to approx. 100 kg
- Material: galvanised steel
Manual lifting grips
Manual lifting grips to enable quick and easy lifting of all standard manhole covers, gratings and dirt collectors.
...more manhole cover lifting aids on request!
You can also ask for:
- shaft frame lifts
- shaft formwork
- manhole cover accessories
- sewer airing and degassing equipment.
Shaft entrance safety equipment
In accordance with DIN EN 341 and composed of: Base unit with pulleys (1 x bolted and 1 x loose), 30 metres of reinforced cable (9 mm diameter) for depths of approx. 10 m, aluminium snap hooks to EN 362 (blue anodised, type B) and cable brake. Transport case or aluminium box available on request.
Additional cable lengths on request!
Required as a support for safety equipment. Specially designed for personal safety during descent and ascent of shafts as well as for life-threatening emergencies. Available with equipment sack on request.
- Material: Aluminium
- Weight: 14.5 kg
- Load capacity: approx. 300 kg
- Transport length: approx. 1.75 m
- Telescopic: 8 different adjustment options
- Height: approx. 1.5 m – 2.2 m
- Width extended: 1.2 m – 2.2 m
- Safety harness in accordance with DIN EN 361, fitting A. Quick-release fastener at leg height.
Hazard warning cones
Made of elasticated, weather-resistant plastic, retro-reflective.
- 500 mm height
- 750 mm height
Further products on request!
Sewer mirrors for pre-inspection after cleaning, or following a blockage or damage. Made of crystal glass with a weather-resistant plastic back panel and a lightweight metal frame including rubber edging and fittings for the mirror rod.
- 285 x 150 mm
- 380 x 250 mm
- 420 x 190 mm
- 540 x 250 mm
Telescopic mirror rod
Made of aluminium, 3 pieces (3 x 1500 mm) with plastic clamps for easy length adjustment, plus special fittings for the sewer mirrors.
The HSE 7 LED type hand-held spotlight is equipped for any situation. It has all the advantages of LED, such as:
- extremely long life expectancy of over 50,000 hours
- very bright light with low energy usage
- shock and vibration resistant.
Its ergonomic design is suitable for singlehanded operation. The head rotates up to 190° for flexible use. The HSE 7 LED fulfils all standards and guidelines (Europe and worldwide).
|Measurements:||350 x 112 x 112 mm|
|Light duration:||over 8 hours|
|Light current:||210 Lumen|
|ATEX:||Zone 1 II 2 G Ex ib II C T4 Gb|
Zone 21 II 2D Ex ib t III C T135ºC Db
|Protection class:||IP 66|