+49 5284_709 0



The construction of our sewer cleaning equipment makes use of many areas of German engineering expertise. Whether technical procedures, FEM analysis or flow simulation – in the end, the correct equipment to suit your specific individual requirements will be decisive for the success of your investment. The efficiency of modern sewer cleaning vehicles depends to a large extent on the accessories. Ask us and take advice from professionals!

Combination grenade bomb nozzle

[Translate to Englisch:] Kombi-Granat Bombendüse

The combination grenade bomb nozzle is an "everyday” / “universal” nozzle, used to remove loose rubble, gravel, sewer films and soft deposits, and excellent for pre-cleaning prior to cutting and chain spinning work, or for “maintenance cleaning”.

Available sizes:

  • MU-HD 06K,  ¾“  
  • MU-HD 08K, 1“    
  • MU-HD 10K, 1¼“ 

Material: wear resistant, tempered steel

The nozzle has two combined jet angles: 15° and 30°. The 15° jet angle is used for propulsion and the 30° angle for cleaning.

The screw-on nozzle inserts are made of ceramic and can be exchanged.

The flat wedge nozzle (sewer bed cleaner)

[Translate to Englisch:] Die Flachkeildüse (Sohlenreiniger)

The flat wedge nozzle is a special nozzle for cleaning sewer beds.

It has a special design that keeps it in the correct position in the sewer and prevents it from tipping over. This is the only nozzle with an articulated joint that allows it to be pulled up to the start of the line in large-diameter pipes without being lifted up by the high-pressure hose. A special articulated joint eliminates angular momentum in the jetting hose.    

Since this nozzle is always directed at the sewer bed, there is no aerosol formation.

Jet angle: 10°

Available sizes:

  • MU-HD FK15, 1“   
  • MU-HD FK16, 1“    
  • MU-HD FK16, 1½  

The screw-on nozzle inserts are made of ceramic and can be exchanged.

The blockage nozzle

[Translate to Englisch:] Die Verstopfungsdüse Foto 1
[Translate to Englisch:] Die Verstopfungsdüse Foto 2

The blockage nozzle is used to remove pipe blockages and compactions. It has an egg-shaped design to help negotiating bends.

Available sizes:

  • MU-E01,  ¼ “ 
  • MU-E02,  ½ “ 
  • MU-E03,  ¾ “  
  • MU-E04,  1 “   
  • MU-E05,  1¼“ 

The nozzle is made of wear-resistant stainless steel. The front jet removes blockages and the rear jet is for cleaning and propulsion.

The screw-on nozzle inserts are made of ceramic and can be exchanged.

Suction nozzle

[Translate to Englisch:] Saugdüse

This suction nozzle has ventilation holes that permit deployment at considerable depths. The notches on the edge of the nozzle make it practically impossible for it to attach itself to any surface by suction.

Material: galvanised steel, aluminium or stainless steel

Available sizes:

  • DN 100
  • DN 125
  • DN 150

Shaft entrance corner guide roller

[Translate to Englisch:] Umlenkrolle Schachtoberkante

The shaft entrance corner guide roller is used to protect sewer cleaning hoses (high-pressure hoses) and suction pressure hoses against damage.

The biggest advantage of this roller is that it provides plenty of space to work with the suction hose (moving it around) in the shaft.

The aluminium pulley is designed to prevent it from tipping over or lifting up, and it has three plastic hose reels.

Shaft base corner guide slide

This corner guide slide is used in conjunction with sewer cleaning hoses (high-pressure hoses). It is cladded with extremely wear-resistant plastic and made of stainless steel.

The slide is very easy to handle because it is always connected to the hose via the nozzle.

The corner guide slide is suitable for hoses with nominal diameters of DN 19, DN 25 and DN 32.

Shaft grating

[Translate to Englisch:] MU-Schachtabdeckrost

To secure shaft openings and road drains during airing, cleaning and jetting operations. Shaft gratings are fitted with two retractable flags. They are available as a closed version or with an approx. 120 mm opening (to insert jetting hoses or TV cable).

Technical details:

  • Diameter: 655 mm
  • Weight: approx. 6 kg
  • Load capacity: up to approx. 100 kg
  • Material: galvanised steel

Shaft cover lifting hooks

[Translate to Englisch:] Schachthaken
[Translate to Englisch:] Schachthaken Skizze

800 in length, fitted on one side with a ring grip and on the other side with:

  • U-shaped hook
  • T-shaped right-angled hook
  • L-shaped hook.

Technical details:

  • Total length: 80 cm
  • Weight: approx. 1 kg